Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Assembling the wheels
Swivel wheel
Swivel wheel unlocked
We recommend that you do not lock the wheels while
moving as this will give a more comfortable ride.
Seat cover
The seat cover can be removed completely from the
seat unit for washing. Simply open the snaps on the
seat unit.
Attention: When mounting the seat cover, thread the
ends of the 5-point restraint back through the relevant
openings without twisting the straps.
Height adjustable, collapsible handlebar
12
Swivel wheel locked
Press and hold the adjust-
ment buttons on both sides
and adjust the height of the
handlebar to the desired
position.
Swivelling the Foldable Handle
Activating the parking brake
Activating the parking brake
Turn the brake lever (12) in arrow direction until it
locks, a red ring (11) becomes visible, the parking
brake is engaged.
Releasing the parking brake
Press the release button (13) and move the brake
lever (12)back to the depicted position; the parking
brake is disengaged.
Supplement to the parking brake
If you should notice a change to the braking action,
loosen the lock nut first in order to be able to imple-
ment settings on the adjusting screw (unscrew). Then
re-attach the lock nut.
In order to tilt the slide,
simultaneously pull the two
sockets 1 on the slide
upwards and then start
tilting. Make sure that the
slide locks again in the two
main clasps on the left and
right and that it is not
stuck.
Werbung
