System Setting Menu; Lan Setting - PeakTech 1895 Bedienungsanleitung

6.2. System Setting MENU

Select SYSTEM SETTING in main SETUP MENU then press
setting, Language setting, Date time setting and System parameter in this sub-menu.

6.2.1. LAN SETTING

1.) In SYSTEM SETTING menu, use
2.) Configure LAN type
You can configure power LAN card use "DHCP" or "Static". Use
JOG to select between DHCP and Static. Then press
3.) Configure IPv4 address
To configure IPv4 address of power supply. Use
rotate JOG to move between 4 segments of IP address.
If you input incorrect number, the number will highlight in red colour. You can press JOG once to start over input another
value.
4.) Configure Lan Mask
key to move to "Lan Mask" line. Direct key-in netmask of your network using. Use JOG to move between 4
Use /
segments of netmask setting.
5.) Configure default gateway
key to move to "Gateway" line. Direct key-in IP address of your network default gateway. Use JOG to move
Use /
between 4 segments of default gateway setting.
6.) Finally press
/ key to move to LAN SETTING. Then press
to confirm and exit LAN Setting.
to enter SYSTEM SETTING MENU. You can configure LAN
key to move to "Lan type" setting. The rotate
/
to confirm setting.
key to move to "IP Addr" line. Direct key-in IP address. Use
/
-41-
.