What To Do If; Possible Cause - Electrolux EON3410 Benutzerhandbuch

Installing the door and the glass panel

10. WHAT TO DO IF...

WARNING!
Refer to the Safety chapters.
The cooking zones do
not operate.
The oven does not heat
up.
The oven does not heat
up.
The oven does not heat
up.
The oven does not heat
up.
2
1
Problem
7. Carefully lift (step 1) and remove (step
2) the glass panels one by one. Start
from the top panel.
8.
Clean the glass panels with water
and soap. Dry the glass panels care-
fully.
When the cleaning is completed, install
the glass panels and the oven door. Do
the above steps in the opposite se-
quence.
Make sure that you put the glass panels
back in the correct sequence. The second
panel has a decorative frame. The screen-
printing zone must face the inner side of
the door. Make sure that after the installa-
tion the surface of the glass panel frame
on the screen-printing zones is not rough
when you touch it.
Make sure that you install the middle pan-
el of glass in the seats correctly (refer to
the illustration).

Possible cause

Refer to the user manual for the hob.
The appliance is deacti-
vated.
The clock is not set.
The necessary settings
are not set.
The fuse in the fuse box
is released.
ENGLISH
Remedy
Activate the appliance.
Set the clock.
Make sure that the set-
tings are correct.
Do a check of the fuse. If
the fuse is released more
than one time, contact a
qualified electrician.
21