Inhaltsverzeichnis
Werbung
OPERATING PRINCIPLE
1.
The pump (A) consists of :
an alternating air motor (B).
an hydraulic section(C) mechanically coupled to the air motor (B).
The air motor is supplied with compressed air by means of the regulator (D) (red knob). The pressure is
read on the gauge (E).
During its alternating movement, the air motor drives the piston of the hydraulic section (C). The fluid is
drawn in (L) and forced under pressure in (N). Due to its design, the pressure is always the one read on
the gauge (E) x the pump ratio.
To adjust the fluid flow rate, turn the red knob (D) (Gauge E).
The pumps are intensive™ ones or FLOWMAX ® ones (with bellow).
2. START UP
2-1 PUMP SUPPLIED IN SUCTION
STANDARD INTENSIVE™
KREMLIN REXSON
- 1 -
N° : 578.029.120-UK-1106
Werbung
Inhaltsverzeichnis
