Seite 1
AIR NEEDLE SCALER PDNE 4000 A1 AIR NEEDLE SCALER DRUCKLUFT-NADELENTROSTER Operation and Safety Notes Bedienungs- und Sicherheitshinweise Translation of original operation manual Originalbetriebsanleitung IAN 43098 43098_par_Druckluft-Nadelentroster PDNE 4000 A1_cover_GB_IE.indd 2 04.06.14 13:17...
Seite 2
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen Funktionen des Gerätes vertraut. GB / IE Operation and Safety Notes Page DE / AT / CH...
Seite 3
43098_par_Druckluft-Nadelentroster PDNE 4000 A1_cover_GB_IE.indd 4 04.06.14 13:17...
Seite 4
43098_par_Druckluft-Nadelentroster PDNE 4000 A1_cover_GB_IE.indd 5 04.06.14 13:17...
Table of contents Introduction Intended use ............................Page 6 Features ...............................Page 6 Technical Data ............................Page 6 Scope of delivery ..........................Page 7 Safety notices General safety rules ..........................Page 7 Risks due to projected parts .......................Page 7 Operating hazards ..........................Page 7 Hazards due to repetitive motions .....................Page 8 Risks associated with accessories ......................Page 8 Hazards in the work environment ......................Page 8 Hazards due to dust and vapours .....................Page 8...
Dispose of packaging and device in Oil daily an environmentally-friendly way! Air needle scaler PDNE 4000 A1 Features Check that all the items are present and Introduction that the device is in perfect condition im- mediately after unpacking.
Introduction / Safety notices the work location. Noise development at the work Never modify the non-rotating, percussive location depends e.g. on the work environment, the machine. Modifications may reduce the effec- work piece, the work piece support and the number tiveness of safety measures and increase oper- of fastener driving processes.
Safety notices The operator and maintenance personnel must Only use accessories and consumables of the be physically capable of managing the size, size and type recommended by the manufac- weight and power of the machine. turer of the non-rotating, percussive machine; Hold the machine correctly: be prepared to do not use other accessory or consumables counteract typical or sudden movements –...
Safety notices Hazard due to vibration Exhaust air must be discharged in such a way that the amount of dust being blown about in a dusty environment is minimised. Exposure to vibration may cause damage to If dust or vapours are generated, the principal the nerves and disturb blood circulation in hands task must be to control them in the area where and arms.
… / Before use / Start-up / After initial use / Changing spare parts / Maintenance Ensure not to exceed the maximum pressure Use the needle scaler to remove rust, paint, specified on the machine. lacquier and similar items. Never carry pneumatic tools by the hose. Never use excess force to push the equipment onto the tool, as this may cause damage.
… / Cleaning and Care / Information about warranty and service processing Via in-line oiler of purchase. In the event of product defects, you Install an in-line oiler directly adjacent to the tool have legal rights against the retailer of this product. Your statutory rights are not limited in any way by (approx.
Year of manufacture: 2014/35 Registered office: Germany IAN: 43098 Model: PARKSIDE AIR NEEDLE SCALER IAN 43098 PDNE 4000 A1 Please note that the following address is not a ser- meets the basic safety requirements of European vice address.
Seite 13
Declaration of Conformity and its amendments. The conformity assessment is based on the following harmonised standards: EN ISO 11148-4:2012 St. Ingbert, 30.06.2014 Karl Peter Uhle - Managing Director - GB/IE 43098_par_Druckluft-Nadelentroster PDNE 4000 A1_content_GB_IE.indd 13 04.06.14 13:16...
Seite 14
43098_par_Druckluft-Nadelentroster PDNE 4000 A1_content_GB_IE.indd 14 04.06.14 13:16...
Seite 15
Inhaltsverzeichnis Einleitung Bestimmungsgemäße Verwendung ....................Seite 16 Ausstattung ............................Seite 16 Technische Daten ..........................Seite 16 Lieferumfang ............................Seite 17 Sicherheitshinweise Allgemeine Sicherheitsregeln ......................Seite 17 Gefährdungen durch herausgeschleuderte Teile ................Seite 17 Gefährdungen im Betrieb ........................Seite 18 Gefährdungen durch wiederholte Bewegungen ................Seite 18 Gefährdungen durch Zubehörteile ....................Seite 18 Gefährdungen am Arbeitsplatz ......................Seite 18 Gefährdungen durch Staub und Dämpfe ..................Seite 19 Gefährdungen durch Lärm .........................Seite 19...
Schutzbrille und Schutzhandschuhe. Entsorgen Sie Verpackung und Täglich ölen Gerät umweltgerecht! Druckluft-Nadelentroster für den Hausgebrauch konzipiert und darf nicht PDNE 4000 A1 kommerziell oder industriell genutzt werden. Einleitung Ausstattung Herzlichen Glückwunsch! Überprüfen Sie unmittelbar nach dem Sie haben sich für ein hochwertiges Auspacken immer den Lieferumfang auf Produkt aus unserem Haus entschieden.
Einleitung / Sicherheitshinweise Diese Werte sind gerätebezogene Kennwerte und gelesen und verstanden werden. Andernfalls geben nicht die Geräuschentwicklung am Verwen- kann dies zu schweren körperlichen Verletzungen dungsort wieder. Die Geräuschentwicklung am führen. Verwendungsort hängt z.B. ab von der Arbeitsum- Die nicht drehende, schlagende Maschine sollte gebung, dem Werkstück, der Werkstückauflage, ausschließlich von qualifizierten und geschulten der Zahl der Eintreibvorgänge.
Sicherheitshinweise Betreiben Sie die Maschine nur dann, wenn das Armen, Schultern, im Halsbereich oder an an- Maschinenwerkzeug mit Hilfe einer geeigneten deren Körperteilen erfahren. Arretierung in der Maschine gehalten wird. Nehmen Sie für die Arbeit mit der nicht drehen- Um Verletzungen zu vermeiden, müssen alle Ver- den, schlagenden Maschine eine bequeme schleißerscheinungen zeigenden, gebrochenen Stellung ein, achten Sie auf sicheren Halt und...
Sicherheitshinweise durch Stromkabel oder sonstige Versorgungs- ersetzen, um eine unnötige Intensivierung der leitungen gegeben sein. Staub- oder Dampfentwicklung zu vermeiden. Die nicht drehende, schlagende Maschine ist Verwenden Sie Atemschutzausrüstungen wie nicht zum Einsatz in explosionsfähigen Atmo- nach den Arbeits- und Gesundheitsschutzvor- sphären bestimmt und nicht gegen den Kontakt schriften gefordert.
Sicherheitshinweise / Vor der Inbetriebnahme Tragen Sie bei Arbeiten in kalter Umgebung Verwenden Sie keine Schnellverschlusskupplun- warme Kleidung und halten Sie Ihre Hände gen am Werkzeugeinlass. Verwenden Sie für warm und trocken. Schlauchanschlüsse mit Gewinde nur solche aus Falls Sie feststellen, dass die Haut an Ihren Fin- gehärtetem Stahl (oder einem Werkstoff von gern oder Händen taub wird, kribbelt, schmerzt vergleichbarer Stoßfestigkeit).
Inbetriebnahme / Nach der Inbetriebnahme / Ersatzteile austauschen / Wartung Inbetriebnahme (s. Abb. A) Drehen Sie den neuen Kopf handfest an (s. Abb. F). Ziehen Sie die 4 Schrauben am Kopf fest an Schrauben Sie ein Gewindestecknippel ¼" (s. Abb. G). (6,35 mm) in das Druckluftgerät.
Wartung / Reinigung und Pflege / Hinweise zu Garantie und Serviceabwicklung ANMERKUNG! Wenn die Haut mit gefährlichem zurück. Mit Reparatur oder Austausch des Produkts Staub in Kontakt kommt, kann dies zu schwerer beginnt kein neuer Garantiezeitraum. Dermatitis führen. Falls während der Wartungs- arbeiten Staub erzeugt oder aufgewirbelt wird, Garantieumfang kann dieser eingeatmet werden.
+49 (0) 6894 9989751 IAN: 43098 (Normal-Tarif dt. Festnetz) Modell: PARKSIDE DRUCKLUFT-NADELENT- Sitz: Deutschland ROSTER PDNE 4000 A1 IAN 43098 den wesentlichen Schutzanforderungen genügt, die in den Europäischen Richtlinien Bitte beachten Sie, dass die folgende Anschrift keine Serviceanschrift ist. Maschinen Richtlinie Kontaktieren Sie zunächst die oben benannte...
Seite 24
C. M. C. GmbH Katharina-Loth-Str. 15 66386 St. Ingbert Germany Last Information Update · Stand der Informationen: 06 / 2014 · Ident.-No.: PDNE4000A1062014-GB / IE IAN 43098 43098_par_Druckluft-Nadelentroster PDNE 4000 A1_cover_GB_IE.indd 1 04.06.14 13:17...