Processing Of Warranty Claims; Environmental Instructions And Disposal Information; Declaration Of Conformity - Parkside PDNE 4000 A1 Betriebsanleitung

... / Environmental instructions and disposal information / Declaration of Conformity
use of force and changes not performed by our au-
thorized service branch will void the warranty.

Processing of warranty claims

Please follow the instructions below to ensure quick
processing of your claim:
When inquiring about your product please have
your receipt and product number (e.g. IAN) ready
as your proof of purchase.
The product number can be found on the type plate,
an engraving, the cover page of your instructions
(bottom left) or the decal at the back or bottom.
In the event of malfunctions or other defects, please
first contact the service department below by phone
or e-mail.
A product recorded as defective, along with the
proof of purchase (sales receipt) and a description
of the defect and when it occurred, can then be re-
turned free of charge to you to the service address
provided.
Notice:
Visit www.lidl-service.com to download
this and many other manuals, product
videos and software.
How to contact us:
GB, IE
Name:
Website:
E-mail:
Phone:
Registered office:
IAN 43098
Please note that the following address is not a ser-
vice address.
Please first contact the service point named above.
12 GB/IE
43098_par_Druckluft-Nadelentroster PDNE 4000 A1_content_GB_IE.indd 12
C. M. C. GmbH
www.cmc-creative.de
service.gb@cmc-creative.de
service.ie@cmc-creative.de
0-808-189-0652
(standard German landline
rates apply)
Germany
Address:
C. M. C. GmbH
Katharina-Loth-Str. 15
66386 St. Ingbert
Germany
Environmental instructions
and disposal information
Don't waste, recycle!
Device, accessories and packaging
should be recycled in an environmen-
tally friendly manner.
Do not dispose of the air tool with your household
waste, or throw into fire or water. If possible, non-
operational equipment should be recycled. Contact
your local retailer for information.

Declaration of Conformity

We,
C. M. C. GmbH
Responsible for documentation: Markus Zimmer
Katharina-Loth-Str. 15
66386 St. Ingbert
Germany
declare in our sole responsibility that the product
Air needle scaler
Serial number: 1714
Year of manufacture: 2014/35
IAN: 43098
Model: PARKSIDE AIR NEEDLE SCALER
PDNE 4000 A1
meets the basic safety requirements of European
Directives
Machinery Directive
EC Directive 2006 / 42 /EC
04.06.14 13:16