Pkm KG 220.4 A plus Bedienungsanleitung Seite 40

The door is not properly closed.
Encrusted ice inside the appliance.
The current temperature setting is
too warm
Warm or hot food inside the
appliance.
The appliance is overfilled.
The door seals are damaged.
The door is not properly closed.
The door seal is damaged or soiled.
The door makes a strange sound when opened.
The door seals are soiled.
If the appliance shows a malfunction not noted on the schedule above or if you
have checked all items on the above schedule but the problem still exists, please
contact the shop you purchased the appliance at.
The operating procedures described below are normal
The refrigerant generates a sound similar to flowing water.
Sometimes you may hear a sound which is generated by the injection process
of the cooling circuit.
Some humidity may accumulate outside the appliance, especially in a moist
surrounding. Simply wipe this humidity away.
The sides of the appliance may get warm while the appliance is running.
When you run the appliance for the first time or the temperature falls below a
certain level the appliance will operate with high power to reach the preset
temperature.
may be generated inside or outside the appliance by high humidity or very warm
ambient temperatures..
You will hear the compressor click if it is activated or deactivated.
is caused by the compressor while running.
may be generated by sequential expansion and shrinkage of the components of the
cooling system. It is caused by variation of temperature before and after the
Strong formation of encrusted ice.
and do not indicate a malfunction.
Distinct noise
Condensed water in/on the appliance
Clicking
Knocking/snapping
Check the door/door seals.
Defrost the appliance.
Close the door.
Clean/replace the door seal.
Clean the seals.
Hum
40