Operating An Ipod Directly (Passenger Control); Searching And Playing Tracks; Searching A Track By Name (Quick-Browzer™) - Sony FM Bedienungsanleitung

To remove the device
Stop playback, then remove the device.
Caution for iPhone
When you connect an iPhone via USB, phone call
volume is controlled by the iPhone, not the unit. Do
not inadvertently increase the volume on the unit
during a call, as a sudden loud sound may result
when the call ends.
Operating an iPod directly (Passenger
control)
1
During playback, press and hold MODE
until [MODE IPOD] appears.
Operations of the iPod become available.
Note that the volume can be adjusted only by
the unit.
To exit passenger control
Press and hold MODE until [MODE AUDIO] appears.

Searching and Playing Tracks

Repeat play and shuffle play
1
During playback, press
SHUF repeatedly to select the desired
play mode.
Playback in the selected play mode may take
time to start.
Available play modes differ depending on the
selected sound source.
Searching a track by name (Quick-
BrowZer™)
1
During CD or USB playback, press
(browse)* to display the list of search
categories.
When the track list appears, press
repeatedly to display the desired search
category.
* During USB playback, press
than 2 seconds to directly return to the beginning
of the category list.
2
Rotate the control dial to select the
desired search category, then press it to
confirm.
3
Repeat step 2 to search the desired track.
Playback starts.
8
GB
(repeat) or
(back)
(browse) for more
To exit the Quick-BrowZer mode
Press (browse).
Searching by skipping items
(Jump mode)
1
Press (browse).
2
Press SEEK +.
3
Rotate the control dial to select the item.
The list is jumped in steps of 10% of the total
number of items.
4
Press ENTER to return to the Quick-
BrowZer mode.
The selected item appears.
5
Rotate the control dial to select the
desired item, then press it.
Playback starts.