Rearranging The Light Effects 1 To 4 - EuroLite LED KLS Bedienungsanleitung

Rearranging the Light Effects 1 to 4

If required, the light effects can be rearranged at the control unit. For this loosen the fixation screws and the
connection cables on the lower side so that the units can be removed. Then rearrange the units, retighten all
fixation screws and reconnect all cables.
After rearranging the light effects, change their order in the setting menu.
MENU
UP
DOWN
ENTER
1
Press the button MENU so many times until SYS is indicated in the display.
2
Press the button ENTER so many times until AddS is indicated in the display.
3
Press the button UP to move right in the display and to select the light effect to be adjusted.
4
Change its value (1, 2, 3 or 4) and thus the position with the button DOWN.
5
Confirm with the ENTER button.
6
Repeat step 2-4 until all four light effects are rearranged as desired.
Default Settings
Example 1
Example 2
www.eurolite.de
Selects menu option
Moves right
Sets value
Saves value
3
4
1
4
4
3
2
2
1
31
1
3
2