Pkm WA6-E1512 Bedienungsanleitung Seite 43

NTC is damaged.
Heating pipe is aged.
Connectors of the hoses are not
watertight.
Drain pump is blocked.
Improperly installed inlet hose.
Outlet hose leakage.
No energy supply.
Circuit board damaged.
Wiring harness damaged.
Accumulated, damp detergent.
Heavily-contaminated laundry.
Wrong amount of detergent
Delayed water supply by 7 minutes.
Delayed water draining by 3 minutes.
The door has not been closed for 3
times.
11
negative temperature coefficient
Faulty heating.
11
Water leakage.
Overflow at the bottom of the appliance
Indicators/display do not work.
Some detergent left in the container.
Unsatisfactory washing results.
Abnormal noise/severe vibrations
Error codes
The appliance can wash but not
heat. Contact your aftersales service
immediately.
Check the hoses.
Clean the outlet hose.
Check the drain pump.
Check inlet hose
Check outlet hose.
Check the energy supply; otherwise
contact your aftersales service.
Clean the container. Use liquid
detergents. Use detergents suitable
for washers.
Select a suitable programme.
Choose the proper amount of
detergent ( look at the information
on the packaging of your detergent).
Check if
 the transport protection has been
removed.
 the
appliance
adjusted properly.
 any metal objects are in the drum.
E10
Open the tap and check that the
inlet hose is not pinched or kinked.
Check if the inlet valve is blocked.
Check the water pressure.
E21
Check the drain pump.
E30
Check that the door is closed.
Check that the door does not trap
43
is installed and