Pkm WA6-E1512 Bedienungsanleitung Seite 32

2. Appliances with a cold-water inlet valve can be connected to the cold-water
7
supply only.
3. Appliances with a warm-water valve can be connected to the warm-water
8
supply. The energy consumption of some programmes will decrease
automatically then.
Connect the water inlet as described in the
figure. If your appliance is equipped with a
warm-water inlet, connect the warm-water tap
with the warm-water inlet.
Connect the hose to the tap and the appliance
(elbow on the appliance). Tighten clockwise.
If water drains out after connection, repeat the entire procedure. If your tap does
not meet the dimensions of the connectors, you must install a suitable tap.
1. Lead the drain hose into a collection device, e.g.
a basin.
2. Connect the water outlet with the drain of a collection device, e.g. a basin.
7
Equipment depends on model.
8
Equipment depends on model.
Water supply
Drain water
32