Trouble Shooting - Pkm WA5-E1008 Bedienungsanleitung

DANGER!
POSSIBLE CAUSE
The plug of the appliance is not
connected to the socket.
The plug has become loose.
The socket is not supplied with
energy.
The fuse is switched off.
The voltage is too low.
Door is not closed properly.
No water supply.
START/PAUSE button is pressed.
POWER is not pressed.
NTC is damaged.
Heating pipe is aged.
Connectors of the hoses are not
watertight.
Drain pump is blocked.
Improperly installed inlet hose.
Outlet hose leakage.
No energy supply.
Circuit board damaged.
Wiring harness damaged.
Accumulated, damp detergent.
11
negative temperature coefficient
Replacing of the power cord
The power cord must be replaced
by a qualified and authorized professional only.

8. TROUBLE SHOOTING

MALFUNCTION
The appliance does not work at all.
Programmes are not started.
Faulty heating.
11
Water leakage.
Overflow at the bottom of the appliance
Indicators/display do not work.
Some detergent left in the container.
MEASURE
Check the corresponding socket by
connecting it with another appliance.
Check the fuse box.
Compare the data on the model
plate with the data of your energy
supplier.
Close the door.
Check the water supply.
Check your settings.
The appliance can wash but not
heat. Contact your aftersales service
immediately.
Check the hoses.
Clean the outlet hose.
Check the drain pump.
Check inlet hose
Check outlet hose.
Check the energy supply; otherwise
contact your aftersales service.
Clean the container. Use liquid
detergents. Use detergents suitable
42