Grasslin Talento 671 plus Bedienungsanleitung Seite 40

Automatic time synchronisation
Automatic time synchronisation is undertaken
in the 20th minute of every complete hour. At
this time, the time switch transfers its set time
and date to the connected time switches via
the IR optical waveguide or two-wire
connection and talento VM plus.
DCF 77 radio operations
1 6 12 18 24
C1
15:26:38
MENU
1
Res.
Manual, immediate time synchronisation
· Set the date and time required on the time
switch.
· Time and date are transferred immediately to
the connected time switches via the IR optical
waveguide.
Info
The time switch receives the DCF77 time signal
with an additional antenna.
! Note separate instructions!
While the time switch is synchronising, the
antenna symbol in the display flashes. It is then
displayed continuously.
Attention
If the antenna symbol flashes continuously in
auto mode, the time synchronisation is not
correct.
40