Vibrations (Hand Arm Vibrations) - ATIKA RW 1800 Twin Originalbetriebsanleitung

S y m b o l s o
S y m b o l s o
Threatened hazard or hazardous situation. Not
observing this instruction can lead to injuries or
cause damage to property.
Important information on proper handling. Not
observing this instruction can lead to faults.
User information. This information helps you to use
all the functions optimally.
Assembly, operation and servicing. Here you are
explained exactly what to do.
The numbers refer to the figures on the pages 3
through 4.
N o r m a l
N o r m a l
• This agitator is suited for DIY work for mixing liquid and
powdry building material such as: paints, mortar, adhe-
sives, plaster, grouting compounds, knifing fillers, coat-
ing compounds.
• Only beaters intended for the device with a max. overall
diameter of 220 mm must be used.
•
This machine must not be used
− as a drilling machine or as a drive for other devices
− for polishing, grinding, sharpening, engraving with any
attachments.
•
Any other utilisation counts as improper use, especial-
ly mixing combustible or explosive materials (
explosion hazard) and use with foodstuffs. The manufactur-
er is not liable for damages resulting from improper use.
 the user alone shall bear the risk.
• The intended usage also includes compliance with the op-
erating, servicing and repair conditions prescribed by the
manufacturer and following the safety instructions included
in the instructions.
• The relevant accident prevention regulations for the opera-
tion as well as the other generally acknowledged occupa-
tional medicine and safety rules must be complied with.
• Unauth orised modifi ca tio ns on th e agitator exclude a
liability of the manufacturer for damages of any kind result-
ing from it.
• Only persons who are familiarised with the device and in-
formed about possible risks are allowed to prepare, operate
and service this device. Repair works may only be carried
out by us or by a customer service agent nominated by us.
12
p e r a t i n g m a n u a l
p e r a t i n g m a n u a l
i n t e n d e d u s e
i n t e n d e d u s e
Even if used properly, residual risks can exist even if the
relevant safety regulations are complied with due to the design
determined by the intended purpose.
Residual risks can be minimised if the "Safety instructions" and
the "Normal intended use" as well as the whole of the operating
instructions are observed.
Observing these instructions, and taking proper care, will re-
duce the risk of personal injury or damage to the equipment.
Failure to observe the safety precautions can lead to injury
to the operator or damage to property.
Contact with the rotating drill chuck (risk of bruises).
Reaching in the rotating beater (risk of cuts)
Risk from electricity, by using non-standard electrical con-
nections.
Touching live parts of opened electrical components.
Impairment of hearing when working on the machine for
longer periods of time without ear protection.
In addition, in spite of all the precautionary measures taken,
non-obvious residual risks can still exist.
RW 1800 Twin: 2,90 m/s²; K = 1.5 m/s²
Warning!
The actual vibration emission level during the use of the
machine may differ from that indicated in the operating
fire and
instructions or indicated by the manufacturer. This may be
caused by the following factors to be minded before and during
the use:
- Proper use of the machine
- Correct operating of the machine
- Proper condition of the machine for use
Proper condition of the beaters or installation of the correct
-
beaters
- Handles and optional anti-vibration handles properly
mounted on the machine body
When you feel uncomfortable or notice discoloration of skin on
your hands during the use of the machine, stop working
immediately. Observe sufficient break times to rest. Failure to
have sufficient break times may result in a hand-arm vibration
syndrome.
The extent of exposure depending on the type of work or
machine use should be estimated and appropriate breaks
taken. In this way, the extent of exposure can be considerably
reduced over the entire work time. Minimise the risk caused by
vibrations. Maintain this machine according to the instructions
in the manual.
Avoid the use of this machine at temperatures under 10°C.
Create a work schedule in order to minimise vibration exposure.
R i s i d u a l r i s k s
R i s i d u a l r i s k s
Vibrations
(hand arm vibrations)