Replacing The Lamp; Technical Specifications - EuroLite Techno Strobe 250 Bedienungsanleitung

There are no serviceable parts inside the device except for the lamp. Maintenance and service operations
are only to be carried out by authorized dealers.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.

Replacing the lamp

Before replacing the lamp, unplug mains lead and let the lamp cool down (approx. 5 minutes).
During the installation do not touch the glass-bulbs bare-handed! Please follow the lamp manufacturer's
notes!
Do not install lamps with a higher wattage! Lamps with a higher wattage generate temperatures the device
was not designed for. Damages caused by non-observance are not subject to warranty.
The flash tube may be replaced by qualified staff only.
For replacement use genuine flash tubes only.
Procedure:
Step 1: Unscrew the fixation-screw on the connection-clasp between the strobe-body and the color-cap.
Step 2: Hold the strobe-body and turn the color-cap clockwise. Leave the security chain intact.
Step 3: Remove the color-cap.
Step 4: Remove the old flash-tube from the lamp-socket.
Step 5: Put the new flash-tube into the lamp-socket.
Step 6: Replace the color-cap and turn the color-cap anticlockwise. Tighten the screw.

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
Flash-rate:
Maximum ambient temperature t
Maximum housing temperature t
Min. distance from flammable surfaces:
Min. distance to lighted object:
Dimensions (LxWxH):
Weight:
Accessories:
OMNILUX Flash Tube 40W U-Shape w/o Base
EUROLITE Color-cap for Techno Strobe 250, clear
EUROLITE Color-cap for Techno Strobe 250 yellow
Please note: All information is subject to change without prior notice. 01.06.2017 ©
DANGER TO LIFE!
Only install the lamp with the device switched off!
Unplug from mains before!
CAUTION!
The lamp has to be replaced when it is damaged
or deformed due to the heat!
Do not operate this device with opened housing!
:
a
(steady state):
C
15/16
230 V AC, 50 Hz ~
45 W
1-10 Hz
45° C
80° C
0.5 m
0.5 m
165 x 165 x 170 mm
0.5 kg
No.
No. 85010162
No. 94202060
No. 94202062
00108982.DOC, Version 2.0