Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
DESCRIPTION
Features
Powerful strobe
• High-quality reflector
• Flash-rate adjustable via rotary-control
• 1 to 10 flashes per second
• Flash-tube already installed
• Compact construction with rugged plastic-housing
• Ready for connection with IEC-plug
• Ideal for party-rooms and household use
Overview
INSTALLATION
Rigging
When installing the device, make sure there is no highly-inflammable
material (decoration articles, etc.) within a distance of min. 0.5 m.
Mount the strobe with the mounting-bracket on the desired installation spot. Adjust the desired inclination-
angle via the mounting-bracket and fix the bracket-screws.
When rigging, derigging or servicing the fixture staying in the area below the installation place, on bridges,
under high working places and other endangered areas is forbidden.
The device must never be fixed swinging freely in the room.
Caution: Devices in hanging installations may cause severe injuries when crashing down! If you have
doubts concerning the safety of a possible installation, do NOT install the device!
Attachment
Before attaching the device, make sure that the installation area can hold a minimum point load of 5 times
the device's weight.
The device must only be installed absolutely planar at a vibration-free, oscilation-free and fire-resistant
location. Make sure that the device is installed absolutely planar by using a water-level.
The device must be installed out of the reach of people.
1) Mounting-bracket
2) Colour-cap
3) Fixation-screw
4) Connection-clasp
DANGER OF FIRE!
13/16
00108982.DOC, Version 2.0
Werbung
Inhaltsverzeichnis
