Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, lamp explosion, crash etc.
INSTALLATION
Installing/Replacing the lamp
Before replacing the lamp, unplug mains lead and let the lamp cool down (approx. 5 minutes).
During the installation do not touch the glass-bulbs bare-handed! Please follow the lamp manufacturer's
notes!
Do not install lamps with a higher wattage! Lamps with a higher wattage generate temperatures the device
was not designed for. Damages caused by non-observance are not subject to warranty.
For the installation, you need one E-40/400 W HQV-400 UV lamp.
During the operation, the lamp reaches temperatures of up to 600° C.
UV illuminants are hazardous waste which needs to be disposed of appropriately.
Please dispose of the unusable UV illuminants in accordance with the current legal regulations.
Procedure:
Step 1: Unscrew the fixation screws of the protective grid.
Step 2: Remove the protective grid.
Step 3: If replacing the lamp, remove the old lamp from the lamp-socket.
Step 4: Insert the E-40/400 W HQV-400 UV lamp into the lamp-socket.
Step 5: Replace the protective grid and tighten the screws.
Overhead rigging
DANGER TO LIFE!
Only install the lamp with the device switched off!
Unplug from mains before!
CAUTION!
The lamp has to be replaced when it is damaged
or deformed due to the heat!
Do not operate this device with opened protective grid!
15/32
00025937.DOC, Version 4.1
Werbung
Inhaltsverzeichnis
