Attachments - Stiga TC 102-Serie Gebrauchsanweisung

PROBLEM
14. U nusual vibrations while
working
15. Uncertain or ineffective braking
16. E rratic forward movement,
poor drive when going uphill or
if the machine has a tendency
to rear up
17. W ith the engine running, the
machine does not move when
the drive pedal is pressed
18. T he machine starts to vibrate
abnormally
If problems persist after having performed the above operations, contact your dealer.
WARNING! Do not take on complicated repair work without the necessary equipment and
technical knowledge. The guarantee is automatically revoked and the manufacturer declines
all responsibility for any poorly effected repairs.

8. ATTACHMENTS

8.1 REAR DISCHARGE GUARD KIT
(Fig. 8.1 no. 41)
Used instead of the grass catcher when the cut-
tings are not collected.
8.2 TOWING KIT (Fig. 8.1 no. 42)
For towing a small trailer.
8.3 CLOTH COVER (Fig. 8.1 no. 43)
Protects the machine from dust when not in use.
8.4 MAINTENANCE BATTERY CHARGER
(Fig. 8.1 no. 44)
This keeps the battery in good working order
when the machine is in storage, guaranteeing
an optimum level of charge and longer battery
life.
LIKELY CAUSE
– c utting-means assembly is full
of grass
– t he cutting means are
unbalanced or loose
– l oose bolts and screws
– t he brake is not adjusted
correctly
– p roblems with the belt or the
engagement device
– release lever in position «B»
– d amaged or loose parts
8.5 "MULCHING" KIT (Fig. 8.1 no. 45)
It chops the grass cuttings finely and leaves
them on the lawn, instead of collecting them in
the grass catcher.
8.6 SNOW CHAINS 18" (Fig. 8.1 no. 46)
These improve front wheel adherence on snow-
covered sections of road and allow the snow
shovel equipment to be used.
8.7 TRAILER (Fig. 8.1 no. 47)
For transporting tools and other objects within
the allowed load limits.
8.8 SPRINKLER (Fig. 8.1 no. 48)
To sprinkle salt or fertilisers.
8.9 SHREDDER (Fig. 8.1 no. 49)
To cut and shred weeds.
18
SOLUTION
– c lean the cutting means
assembly (see 5.4.10)
– c ontact your Dealer
– c heck and tighten all the engine
and frame bolts
– c ontact your Dealer
– c ontact your Dealer
– p ut into position «A» (see 4.33).
– s top the machine and disconnect
the spark plug cable
– i nspect for damage
– c heck for and tighten any loose
parts.
– h ave all checks, repair work and
replacements carried out by a
specialized Centre only.