Protecting The Environment; Ec Declaration Of Conformity - Black & Decker KD1001 Handbuch

Warning! Before performing any maintenance, switch off and
unplug the tool.
Regularly clean the ventilation slots in your tool using

a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.

Do not use any abrasive or solvent-based cleaner.
Filling the grease reservoir
Periodically switch off and check the grease level; if it is less
than a quarter full, refill the reservoir with the correct grease.
Additional grease is available from Black & Decker repair agents.
Remove the grease cap (8) and fill the reservoir with the

recommended grease.
Refit the grease cap (8).

Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.

Connect the brown lead to the live terminal in the new plug.

Connect the blue lead to the neutral terminal.

Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 5 A.

Protecting the environment

Z
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
z available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Technical data
Input voltage
Power input
No-load speed
Impact rate
Impact energy
Tool holder
Max. drilling capacity
Concrete
Steel
Wood
Core drilling capacity in soft brick
Chiselling
Weight

EC declaration of conformity

KD1001/TYPE 2
Black & Decker declares that these products conform to:
98/37/EC, EN 60745
Level of sound pressure according to EN 60745:
Sound pressure (L ) 93 dB(A), uncertainty (K) 3 dB(A)
pA
Acoustic power (L ) 104 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to
EN 60745:
Hammer drilling into concrete (a
uncertainty (K) 1.5 m/s
Chiselling (a ) 23.01 m/s
h, Cheq
_
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of Black & Decker.
Spennymoor, County Durham DL16 6JG,
ENGLISH
KD1001/TYPE 2
V 230
AC
W 1,000
min 800
-1
min 3,000
-1
J 3.5
SDS-plus
mm 26
mm 13
mm 40
mm 65
mm 22
kg 5.4
) 19.95 m/s
2
h, HD
2
, uncertainty (K) 1.5 m/s
2
Kevin Hewitt
Director of Consumer Engineering
United Kingdom
1-9-2008
,
2
7