Technical Data; Protecting The Environment - Black & Decker BDCH188 Originalanweisungen

ENGLISH
Use masonry bits when drilling in soft masonry.
u
Use a lubricant when drilling metals other than cast
u
iron and brass.
Make an indentation using a centre punch at the
u
centre of the hole to be drilled in order to improve
accuracy.
Screwdriving
Always use the correct type and size of screwdriver
u
bit.
If screws are difficult to tighten, try applying a small
u
amount of washing liquid or soap as a lubricant.
Always hold the tool and screwdriver bit in a straight
u
line with the screw.
Maintenance
Your BLACK+DECKER tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper
tool care and regular cleaning.
Your charger does not require any maintenance apart from
regular cleaning.
Warning! Before performing any maintenance on the
tool, remove the battery from the tool. Unplug the charger
before cleaning it.
Regularly clean the ventilation slots in your tool and
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
u
Do not use any abrasive or solvent-based cleaner.
Regularly open the chuck and tap it to remove any
u
dust from the interior.

Protecting the environment

Z
Separate collection. Products and batteries
marked with this symbol must not be disposed
of with normal household waste.
Products and batteries contain materials that can be
recovered or recycled, reducing demand for raw materials.
Please recycle electrical products and batteries according
to local provisions. Further information is available at
www.2helpU.com
10
(Original instructions)

Technical data

Voltage V
No-load speed Min
Max. torque
Nm
Chuck capacity
mm
Max drilling capacity
Steel/wood/masonry mm
Weight kg
Charger
Input voltage V
AC
Output voltage V
DC
Current mA
Approx. charge time Hours
Battery BL1518
Voltage
V 18
DC
Capacity
Ah 1.5
Type
Li-Ion
Level of sound pressure according to EN 62841:
Sound pressure (L ) 84.7 dB(A), uncertainty (K) 5 dB(A)
pA
Sound power (L ) 98.4 dB(A), uncertainty (K) 5 dB(A)
WA
Vibration total values (triax vector sum) according to EN 62841:
Hammer Drilling into concrete (a
2
Drilling into metal (a ) 0.8 m/s
h,D
BDCH188 (H1)
18
DC
-1
0-400/0-1350
17/38
10
10/25/10
1.4
905902** Type 2 905998** Type 1
100-240 230
8-20 18
400 1
3 - 5 1 - 5
BL2018 BL4018
18 18
2.0 4.0
Li-Ion Li-Ion
2
) 9.4 m/s , uncertainty (K) 1.5 m/s
h,HD
2
, uncertainty (K) 1.5 m/s
2