Herunterladen Inhalt Inhalt Diese Seite drucken

Specifications; Optional Accessories; Standard Accessories; Battery Removal/Installation - Hitachi WH 14DSAL Bedienungsanleitung

Akku-schlagschrauber
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 14
English
8.
Do not put or subject the battery to high
temperatures or high pressure such as into a
microwave oven, dryer, or high pressure container.
9.
Keep away from fire immediately when leakage
or foul odor are detected.
10. Do not use in a location where strong static
electricity generates.
11. If there is battery leakage, foul odor, heat
generated, discolored or deformed, or in any way
appears abnormal during use, recharging or
storage, immediately remove it from the
equipment or battery charger, and stop use.
CAUTION
1.
If liquid leaking from the battery gets into your
eyes, do not rub your eyes and wash them well
with fresh clean water such as tap water and
contact a doctor immediately.
If left untreated, the liquid may cause eye-
problems.

SPECIFICATIONS

POWER TOOL
Model
No-load speed
Capacity (Ordinary bolt)
Tightening torque
(Maximum)
BSL1430: Li-ion
Rechargeable battery
14.4 V (3.0 Ah 8 cells) 14.4 V (4.0 Ah 8 cells) 14.4 V (1.5 Ah 4 cells) 18 V (3.0 Ah 10 cells) 18 V (4.0 Ah 10 cells) 18 V (5.0 Ah 10 cells) 18 V (1.5 Ah 5 cells)
Weight
1.6 kg
CHARGER
Model
Charging voltage
Weight

STANDARD ACCESSORIES

In addition to the main unit (1), the package contains the
accessories listed in the table below.
1 Charger (UC18YRSL or UC18YGSL) ... 1
2 Battery ............................................... 2
WH18DSAL
3 Plastic case ....................................... 1
4 Battery cover .................................... 1
1 Charger (UC18YRSL or UC18YGSL) ... 1
2 Battery ............................................... 2
WH14DSAL
3 Plastic case ....................................... 1
4 Battery cover .................................... 1
Standard accessories are subject to change without
notice.
7
WH14DSAL
140 N·m
BSL1440: Li-ion
BSL1415X: Li-ion
1.6 kg
UC18YRSL
UC18YGSL
14.4 V – 18 V
14.4 V – 18 V
0.6 kg
0.4 kg
2.
If liquid leaks onto your skin or clothes, wash well
with clean water such as tap water immediately.
There is a possibility that this can cause skin irritation.
3.
If you find rust, foul odor, overheating, discolor,
deformation, and/or other irregularities when using
the battery for the first time, do not use and return
it to your supplier or vendor.
WARNING
If an electrically conductive foreign object enters the
terminals of the lithium ion battery, a short-circuit may
occur resulting in the risk of fire. Please observe the
following matters when storing the battery.
Do not place electrically conductive cuttings, nails,
steel wire, copper wire or other wire in the storage
case.
Either install the battery in the power tool or
store by securely pressing into the battery cover
until the ventilation holes are concealed to prevent
short-circuits (See Fig. 1).
0 – 2600 min
–1
M6 – M14
BSL1830: Li-ion
1.4 kg
1.7 kg

OPTIONAL ACCESSORIES

(Sold separately)
1. Battery
(BSL1430,
(BSL1415X)
BSL1440)
Optional accessories are subject to change without notice.
APPLICATION
Driving and removing of machine screws, wood
screws, tapping screws, etc.

BATTERY REMOVAL/INSTALLATION

1. Battery removal
Hold the handle tightly and push the battery latch to
remove the battery (see Fig. 2).
CAUTION:
Never short-circuit the battery.
2. Battery installation
Insert the battery while observing its polarities (see
Fig. 2).
WH18DSAL
145 N·m
BSL1840: Li-ion
BSL1850: Li-ion
1.7 kg
1.7 kg
(BSL1830,
BSL1840,
BSL1850)
BSL1815X: Li-ion
1.5 kg
(BSL1815X)

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Wh 18dsal

Inhaltsverzeichnis