Kenwood KDC-BT35U Bedienungsanleitung Seite 6

GETTING STARTED
5
Turn the volume knob to select [CLOCK FORMAT], then press the knob.
6
Turn the volume knob to select [12H] or [24H], then press the knob.
7
Press and hold to exit.
To return to the previous setting item, press
While in clock display screen...
Press and hold to enter clock adjustment mode directly.
4
Then, perform step to set the clock.
3
Set the initial settings
1 Press repeatedly to enter STANDBY.
2 Press the volume knob to enter [FUNCTION].
3 Turn the volume knob to make a selection (see the following table),
then press the knob.
4 Repeat step 3 until the desired item is selected or activated.
5 Press and hold to exit.
To return to the previous setting item, press
AUDIO CONTROL
SWITCH REAR/ SUB-W: Selects whether rear speakers or a subwoofer are connected
PREOUT to the line out terminals on the rear (through an external amplifier).
SP SELECT OFF/ 5/4/ 6 × 9/6/ OEM: Selects according to the speaker size (5 inches or
4 inches, 6×9 inches or 6 inches) or OEM speakers for optimum performance.
TUNER SETTING
PRESET TYPE NORMAL: Memorizes one station for each preset button in each band (FM1/
FM2/ FM3/ MW/ LW). ; MIX: Memorizes one station for each preset button,
regardless of the selected band.
4
SYSTEM
.
.
Default: XX
CLOCK
ENGLISH
РУССКИЙ
KEY BEEP ON: Activates the keypress tone. ; OFF: Deactivates.
SOURCE SELECT
BUILT-IN AUX ON: Enables AUX in source selection. ; OFF: Disables. ( 13)
P-OFF WAIT Applicable only when the demonstration mode is turned off.
Sets the duration when the unit will automatically turn off (while in
standby mode) to save the battery.
20M: 20 minutes ; 40M: 40 minutes ; 60M: 60 minutes ;
WAIT TIME – – –: Cancels
CD READ 1: Automatically distinguishes between audio file disc and music
CD. ; 2: Forces to play as a music CD. No sound can be heard if an
audio file disc is played.
F/W UPDATE
UPDATE SYSTEM / UPDATE BT
F/W UP xx.xx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not
activated).
For details on how to update the firmware, see:
www.kenwood.com/cs/ce/
CLOCK DISPLAY ON: The clock time is shown on the display even when the unit is
turned off. ; OFF: Cancels.
Selected language is use as the display langauge for [FUNCTION]
menu and Tag information (folder name, file name, song title, artist
name, album name) if applicable.