Kenwood KDC-BT35U Bedienungsanleitung Seite 19

TROUBLESHOOTING
Symptom Remedy
"NA FILE" Make sure the disc contains supported audio files.
( 15)
"NO DISC" Insert a playable disc into the loading slot.
"TOC ERROR" Make sure the disc is clean and inserted properly.
"PLEASE EJECT" Reset the unit. If this does not solve the problem,
consult your nearest service center.
"READ ERROR" Copy the files and folders onto the USB device again. If
this does not solve the problem, reset the USB device or
use another USB device.
"NO DEVICE" Connect a USB device, and change the source to USB
again.
"COPY PRO" A copy-protected file is played.
"NA DEVICE" Connect a supported USB device, and check the
connections.
"NO MUSIC" Connect a USB device that contains playable audio files.
• Reconnect the iPod.
"iPod ERROR"
• Reset the iPod.
• Sound cannot • Reconnect the Android device.
• If in [HAND MODE], launch any media player
be heard during
playback. application on the Android device and start playback.
• Sound output only • If in [HAND MODE], relaunch the current media
from the Android player application or use another media player
device. application.
• Restart the Android device.
• If this does not solve the problem, the connected
Android device is unable to route the audio signal to
unit. ( 16)
Symptom Remedy
• Make sure KENWOOD MUSIC PLAY APP is installed on the
Cannot playback at
[BROWSE MODE].
• Reconnect the Android device and make the appropriate
• If this does not solve the problem, the connected Android
• Switch off the developer options on the Android device.
"NO DEVICE" or "READING"
• Reconnect the Android device.
keeps flashing.
• If this does not solve the problem, the connected Android
Playback is intermittent or Turn off the power saving mode on the Android device.
sound skips.
• Reconnect the Android device.
"ANDROID ERROR" /
• Restart the Android device.
"NA DEVICE"
• Search from the Bluetooth device again.
No Bluetooth device is
• Reset the unit. ( 3)
detected.
• Make sure you have entered the same PIN code to both the
Bluetooth pairing cannot
be made.
• Delete pairing information from both the unit and the
• Adjust the microphone unit's position. ( 8)
Echo or noise is heard
• Check the [ECHO CANCEL] setting. ( 9)
during a phone
conversation.
• Reduce the distance between the unit and the Bluetooth
Phone sound quality is
poor.
• Move the car to a place where you can get a better signal
Android device. ( 7)
setting in [ANDROID SETUP]. ( 7)
device does not support [BROWSE MODE]. ( 16)
device does not support [BROWSE MODE]. ( 16)
unit and Bluetooth device.
Bluetooth device, then perform pairing again. ( 8)
device.
reception.
ENGLISH
17