Controls And Indicators; Control Panel And Indicator Lights - Candy GO DC 36T Bedienungsanleitung

40005291Eng.qxd 20/09/2007 15:31 Page 11

Controls and indicators

FILTER CARE
COUNTDOWN DISPLAY
INDICATOR
EMPTY START ON/OFF PROGRAMME
ACRYLICS/ START
WATER DELAY BUTTON SELECTOR
SYNTHETICS BUTTON
INDICATOR BUTTON
BUTTON

Control panel and indicator lights

Programme Selector – Select the required programme
On/Off button and indicator (Ein/Aus) – Press to switch on, the indicator will light
Start Delay button (Startzeitvorwahl) – Allows the user to delay the start of the drying
cycle (see details of operation page 16)
Start – Press Start to commence the selected drying programme
Acrylics/Synthetics button (Schontrocknung) – Press to reduce the heat level for delicate
items, the indicator above the button will light up. To change the heat setting the
programme must be reset
Low Heat – Indicator light ON High Heat – Indicator light OFF
Empty Water indicator (Wasserbehälter leeren) – lights when the water container is full
Filter Care indicator (Filter säubern) – lights when the filter needs cleaning
Display
START – When the dryer is switched On the START indicator will flash, when the
programme starts the START indicator will light up
60' – Indicator lights when there is less than 60 minutes left until completion of the
programme
15' - Indicator lights when there is less than 15 minutes left until completion of the
programme. At this stage of the drying cycle the machine enters the Cool Down phase
STOP - Indicator lights when the programme is finished
6h - 6 hour start delay (light flashes when in operation)
9h - 9 hour start delay (light flashes when in operation)
11