Controls And Indicators; Control Panel And Indicator Lights - Candy GO DC 78 Anleitung

40004848.qxd 01/12/2006 10:33 Page 11

Controls and indicators

START DELAY TIME TO END DIGITAL FILTER CARE EMPTY WATER
DISPLAY
INDICATOR INDICATOR INDICATOR INDICATOR
ACRYLICS/
BUZZER DELAY START ON/OFF PROGRAMME
SYNTHETICS
BUTTON START BUTTON BUTTON SELECTOR
BUTTON
BUTTON

Control panel and indicator lights

Programme Selector – Select the required programme.
On/Off button and indicator – Press to switch on, the indicator will light.
The display will show the selected programme (see Programme Guide).
Acrylics/Synthetics button – Press to reduce the heat level for delicate
items, the indicator above the button will light up. To change the heat setting
the programme must be reset.
Low Heat - Indicator light ON
High Heat - Indicator light OFF
Start button – Press Start to commence the selected drying programme. Press
for 5 seconds to cancel/reset the programme.
Delay Start button – Allows the user to delay the start of the drying cycle
(see details of Operation on page 16).
Buzzer button – The buzzer is active in normal operation. To cancel the
buzzer press the button and the indicator will light up.
Empty Water indicator – Lights when the water container tray is full.
Filter Care indicator – Lights when the filter needs cleaning.
Time to End indicator – Lights when the program starts.
Start Delay indicator – Light flashes when the program starts.
Digital Display – The two digit display indicates the selected programme, the
Start Delay and the Time to End of the programme.
11