Henkelman BOXER 35 Bedienungsanleitung Seite 19

BEDIENUNGSANLEITUNG SERIEN BOXER, MARLIN, FALCON, POLAR
ACTIVATION QUICK STOP H
Starting situation: machine is in normal operation mode and the lid is open
A. Select the correct program with PROG 0-9 key. Program number is displayed on the small
display.
PROG
0 - 9
B. Press REPROG key to switch into program mode.
REPROG
The program number now starts to blink on the small display.
C. Press PROG 0-9 key, in the right display H
PROG
The indicator lights for vac will turn on.
0 - 9
The function is only activated for the selected program number
D.
E.
Repeat steps D and E for setting other function values.
F
.
Press REPROG key to switch into program mode.
The program number now stops to blink.
REPROG
Program is now ready for use.
To switch off the Quick Stop H
will disappear from the display and the previous vacuum value will be shown again.
Press Reprog key to return to normal user mode.
Versie 11.10 DIG.DU
PK Elektronik Vertriebs GmbH, E-Mail: info@pkelektronik.com, Internet: www.pkelektronik.com
O SENSOR PROGRAM
2
Select the required function for programming with the FUNCTION SELECT
Key.
The indicator lights will turn on for the active functions when selected.
Set the percentage of vacuum required or the amount of time required for the
selected function by using the + and – keys.
O sensor, open the program by pressing Reprog key and push the Prog 0-9 key, the H
2
O will appear.
2
O
2
19