First Aid In Case Of Malfunctions; Dimensions And Illustrations - Kindermann Deckenlift compact2 80 Installationsanleitung

7. Maintenance
The safety and reliability of the ceiling lift must be checked at least once a year. The check comprises all mechanical parts,
steel ropes, cable connections, screws. Especially the steel ropes must not be worn out, broken or bent. The two carrying
ropes must run freely and simultaneously and should be free of any other damages. Damaged parts must be exchanged
immediately!

8. First aid in case of malfunctions

➡ Lift does not react to UP or DOWN command, no function
• Check the micro switch of the rope control: both micro switches on the carrying rope must be inserted in the tightened
rope.
• Lift beyond the stop position so that the concertina elements are extremely opened and the carrying ropes are loose:
move the lift back until the ropes are tightened; press the micro switch.
• Motor overheated in operation, power cut via thermo switch; let the motor cool down for approx. 15 minutes
(only short time operation of 4 minutes possible).
• Brakes are blocked (motor makes noises): Contact the service team.
• Lift in upward position cannot be lowered again: Take off the ceiling plate, check if the lift was moved above the
upper stop position (error) and was blocked. Try to pull down the lift while giving the DOWN command, to loosen the
mechanical blockage. Programme the upper stop position anew.
➡ UP and DOWN mixed up
• Control cables are mixed up: Separate the unit from the mains and exchange the wiring.

9. Dimensions and illustrations

• Space for projector within the cross bar: 41 x 54 cm (WxL)
• Space for projector below the cross bar: 58 x 58 cm (WxL)
• Projector weight: max. 20 kg
• Required ceiling cutout: 600 x 600 mm
• Measure X = 0 up to 280 mm
• Required cable length within the ceiling lift 7466 000 150: approx. 2 m (7466 000 151 approx. 3 m)
31