Display Information; Usb Mode; Set Picture And Sound; Change Picture Settings - AEG CTV 3202 LCD Bedienungsanleitung, Garantie

English
32

7.4 Display Information

You can display additional information for the current channel (Programme position, channel name (if stored), color trans-
fer system, and the television standard).
1. Press the DISPLAY button to have the information displayed for a short time.

8. USB Mode

• Connect your USB device directly at the USB port at the rear of the unit.
• Press MEDIA. The USB menu is displayed.
• Press / to select the playback mode and press ENTER. to confirm.
Only the selected file types are displayed.
NOTE:
• Press EXIT to return to playback selection mode.
• For further operation observe the instructions at the bottom of the
screen.
• Press to select the file to be played/displayed. The info
window with additional information is displayed and playback starts.
• Press (17). If required, press DISPLAY to display the control menu.
• Press / to navigate the control menu. Press ENTER to execute the selected function.
NOTE:
• The control menu functions differ depending on the playback mode.
• Press EXIT to hide the control menu. Press DISPLAY to display the control menu again.
Remote Control Operation
• Press / to skip to the next/previous file.
• For music/video data files: Press / to search within the file forward or back. Press
mode.
• Press the button to stop playback.

9. Set Picture and Sound

9.1 Change Picture Settings

Your TV set comes with 3 preset and one manually adjustable picture settings (Standard, Mild, User and Dynamic). Press
the PMODE button to cycle through the options. Select User to access your user-defined picture settings.
5. Press the MENU button to be able to make more changes. Press to access the desired item and set the value with
the arrow buttons / .
6. Press the MENU button to access the complete picture menu for further changes.
7. Press EXIT to exit the menu and save the changes.
Define Picture Mode
1. Press the MENU button to display the OSD main menu.
2. Press the arrow button until the menu PICTURE is activated.
3. Press to highlight the item Picture Mode. Press ENTER to display
the menu.
4. Press / to select item User. The following items are activated and
can be changed.
Contrast / Brightness / Color / Sharpness and Tint
(only activated for NTSC signals)
to return to normal playback