Changing The Batteries - Beurer PM 18 Gebrauchsanleitung

Setting the alarm clock
Press the START/STOP/RESET button in the time display for at least
2 seconds. You get into the setting menu; move on to the next setting
by pressing the MODE key. The settings flash if you can change
them. Change the settings with the START/STOP/RESET and
SELECT buttons.
Then leave the setting menu again by keeping the MODE button
pressed for approx. 2 seconds.
Tip: If you keep the START/STOP/RESET and SELECT buttons
pressed for more than 2 seconds, then the relevant setting automati-
cally counts forwards or backwards.
6. C
HANGING THE
Have the battery changed by a specialized dealer (CR2032 3V lith-
ium battery).
Used batteries do not belong in the household gar-
bage. Dispose of these through your electronics
dealer or your local collecting point for recoverables.
You are legally required to do this. We will find this
symbol on batteries containing toxic chemicals: Pb =
battery contains lead, Cd = battery contains cadmium,
Hg = battery contains mercury.
B
ATTERIES
19
G
B