Specifications; Important Safety Instructions - Makita BFT022F Betriebsanleitung

ENGLISH
(Original instructions)
1 Red indicator
2 Button
3 Battery cartridge
4 Switch trigger
5 Reversing switch lever
6 Front lamp
7 LED indicator

SPECIFICATIONS

Model
Fastening torque
No load speed (min
Dimensions
Net weight
Rated voltage
Battery cartridge
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from
country to country.
• Weight, with battery cartridge, according to EPTA-Pro-
cedure 01/2003
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future refer-
ence.
CORDLESS SCREWDRIVER SAFETY
WARNINGS
1. Hold power tool by insulated gripping surfaces,
when performing an operation where the fas-
tener may contact hidden wiring. Fasteners con-
tacting a "live" wire may make exposed metal parts
of the power tool "live" and could give the operator
an electric shock.
2. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
4
Explanation of general view
8 Adjusting grip
9 Ring
10 Adjusting ring
11 Scale
12 Hole for adjusting grip
13 Yellow line
14 Compression spring
BFT022F
Hard joint 0.5 – 2 N·m
Soft joint 0.5 – 2 N·m
–1
)
ENE033-1
GEA010-1
GEB050-2
BFT044F
1 – 4 N·m
1 – 4 N·m
700 950
200 x 74 x 250 mm
(with Battery Cartridge BL1430)
200 x 74 x 235 mm
(with Battery Cartridge BL1415)
1.5 kg (with Battery Cartridge BL1430)
1.4 kg (with Battery Cartridge BL1415)
D.C.14.4 V
BL1430 / BL1430A / BL1415
3. Hold the tool firmly.
4. Keep hands away from rotating parts.
5. Do not touch the bit or the workpiece immedi-
ately after operation; they may be extremely hot
and could burn your skin.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
failure to follow the safety rules stated in this instruc-
tion manual may cause serious personal injury.

IMPORTANT SAFETY INSTRUCTIONS

FOR BATTERY CARTRIDGE
1. Before using battery cartridge, read all instruc-
tions and cautionary markings on (1) battery
charger, (2) battery, and (3) product using bat-
tery.
2. Do not disassemble battery cartridge.
3. If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4. If electrolyte gets into your eyes, rinse them out
with clear water and seek medical attention right
away. It may result in loss of your eyesight.
15 Bit
16 Sleeve
17 Limit mark
18 Brush holder cap
19 Screwdriver
BFT084F BFT126F
3 – 8 N·m 5 – 12 N·m
3 – 8 N·m 5 – 12 N·m
780 410
ENC007-7