Specifications - Makita BFR540 Betriebsanleitung

ENGLISH (Original Instructions)
1. Red indicator
2. Button
3. Battery cartridge
4. Star marking
5. Lever
6. Stopper base
7. Label on feeder box
8. Fenestella
9. Casing
10. Adjusting knob
11. Switch trigger

SPECIFICATIONS

No load speed (min
Overall length
Rated voltage
Standard battery cartridges
• Due to our continuing programme of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
CORDLESS SCREWDRIVER
SAFETY WARNINGS
1. Hold power tool by insulated gripping surfaces,
when performing an operation where the fastener
may contact hidden wiring. Fasteners contacting a
"live" wire may make exposed metal parts of the
power tool "live" and could give the operator an
electric shock.
2. Always be sure you have a firm footing. Be sure
no one is below when using the tool in high
locations.
3. Hold the tool firmly.
4. Keep hands away from rotating parts.
Explanation of general view
12. Reversing switch lever
13. Thumb screw
14. Plane bearing
15. Dust cover
16. Bit
17. Feeder box
18. Screw strip
19. Screw guide
20. Driving position
21. Reverse button
22. Hook
Model
Screw strip
-1
)
Net weight
BFR540
2.0 kg
D.C. 14.4 V
BL1430
5. Do not touch the bit or the workpiece immediately
ENE033-1
after operation; they may be extremely hot and
could burn your skin.
SAVE THESE INSTRUCTIONS.
GEA010-1
WARNING:
DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to safety
rules for the subject product. MISUSE or failure to
follow the safety rules stated in this instruction
manual may cause serious personal injury.
IMPORTANT SAFETY
INSTRUCTIONS
FOR BATTERY CARTRIDGE
GEB050-2
1. Before using battery cartridge, read all
instructions and cautionary markings on (1)
battery charger, (2) battery, and (3) product using
battery.
2. Do not disassemble battery cartridge.
3. If operating time has become excessively shorter,
stop operating immediately. It may result in a risk
of overheating, possible burns and even an
explosion.
4. If electrolyte gets into your eyes, rinse them out
with clear water and seek medical attention right
away. It may result in loss of your eyesight.
5. Do not short the battery cartridge:
23. Wall
24. Limit mark
25. Front cover
26. Screws
27. Spring
28. Arm
29. Recessed part
30. Carbon brush cap
31. Hole
BFR550
4 x 25 - 55 mm
4,000
424 m
2.1 kg
D.C. 18 V
BFR750
4 x 45 - 75 mm
464 mm
2.1 kg
D.C. 18 V
BL1830
ENC007-7
5