Specifications - Makita BFS440 Betriebsanleitung

ENGLISH (Original Instructions)
1. Red part
2. Button
3. Battery cartridge
4. Switch trigger
5. Lamp
6. Reversing switch lever

SPECIFICATIONS

Model
Capacities
No load speed (min
Overall length
Net weight
Rated voltage
• Due to our continuing programme of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
CORDLESS SCREWDRIVER
SAFETY WARNINGS
1. Hold power tool by insulated gripping surfaces,
when performing an operation where the fastener
may contact hidden wiring. Fasteners contacting a
"live" wire may make exposed metal parts of the
power tool "live" and could give the operator an
electric shock.
2. Always be sure you have a firm footing. Be sure
no one is below when using the tool in high
locations.
3. Hold the tool firmly.
4. Keep hands away from rotating parts.
5. Do not touch the bit or the workpiece immediately
after operation; they may be extremely hot and
could burn your skin.
SAVE THESE INSTRUCTIONS.
All manuals and user guides at all-guides.com
Explanation of general view
7. Locator
8. Bit
9. Magnetic bit holder
10. Hook
11. Limit mark
12. Front cover
Drywall screw
-1
)
ENE033-1
DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to safety
rules for the subject product. MISUSE or failure to
follow the safety rules stated in this instruction
manual may cause serious personal injury.
GEA010-1
IMPORTANT SAFETY
INSTRUCTIONS
FOR BATTERY CARTRIDGE
1. Before using battery cartridge, read all
2. Do not disassemble battery cartridge.
GEB050-2
3. If operating time has become excessively shorter,
4. If electrolyte gets into your eyes, rinse them out
5. Do not short the battery cartridge:
13. Screws
14. Spring
15. Arm
16. Recessed part
17. Carbon brush cap
18. Hole
BFS440
4 mm
4,000
258 mm
1.6 kg
D.C. 14.4 V
WARNING:
instructions and cautionary markings on (1)
battery charger, (2) battery, and (3) product using
battery.
stop operating immediately. It may result in a risk
of overheating, possible burns and even an
explosion.
with clear water and seek medical attention right
away. It may result in loss of your eyesight.
(1) Do not touch the terminals with any
conductive material.
(2) Avoid storing battery cartridge in a container
with other metal objects such as nails, coins,
etc.
(3) Do not expose battery cartridge to water or
rain.
A battery short can cause a large current flow,
overheating, possible burns and even a
breakdown.
BFS450
4 mm
4,000
258 mm
1.7 kg
D.C. 18 V
ENC007-6
5