Intended Use; Technical Data; Assembly - EINHELL BG-CB 2041 TH Originalbetriebsanleitung

Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Original operating instructions
•
Safety information

3. Intended use

Important. This hedge trimmer is suitable for cut-
ting hedges, bushes and shrubs.
The equipment may be used only for its intended
purpose. Any other use is deemed to be a case
of misuse.
The user/operator and not the manufacturer will
be liable for any damage or injuries of any kind
which result from such misuse.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or indust-
rial businesses or for equivalent purposes.

4. Technical data

Engine type ................................2-stroke engine,
.................................. air-cooled, chrome cylinder
Engine output (max.).....................0.8 kW / 1.1 hp
Displacement ......................................... 25.4 cm
Idle engine speed ................................3200 min
Max. engine speed...............................9000 min
Cutter bar length ..................................... 400 mm
Max. cutting length .................................. 375 mm
Cuts per minute ........................................... 1450
Weight.........................................................6.4 kg
Ignition ..................................................Electronic
Drive .........................................Centrifugal clutch
Tank capacity .............................................450 ml
Spark plug ...............................Champion RCJ6Y
Fuel consumption (specifi c) ................. 582g/kWh
Blade type .......400/Huzhou Jinlifu Blade Co., Ltd
Anl_BG_CB_2041_TH_SPK1.indb 23 Anl_BG_CB_2041_TH_SPK1.indb 23
GB
Sound and vibration
L sound pressure level ...................... 102 dB(A)
pA
K uncertainty .............................................. 3 dB
pA
L sound power level .......................... 112 dB(A)
WA
K uncertainty ............................................. 3 dB
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
In operation
Vibration emission value a
K uncertainty = 3 m/s
2
Reduce noise generation and vibration to a
minimum!
•
Use only equipment that is in perfect condi-
tion.
•
Maintain and clean the equipment regularly.
•
Adopt your way of working to the equipment.
•
Do not overload the equipment.
•
Have the equipment checked if necessary.
•
Switch off the equipment when not in use.
•
Wear gloves.

5. Assembly

5.1 Joining the gear unit to the drive rod me-
chanism (Fig. 4-6)
Tools required: Allen keys size 4mm/5mm (sup-
plied)
Push the gear unit (Item 3b) and the drive rod
mechanism (Item 4) into each other. Center both
by turning the screw (Item K). Important! Make
3
sure that the screw (Item K) is turned exactly into
-1
the guide hole (Item F). Otherwise there is a risk
-1
of the upper part of the rod mechanism being
damaged. To join the two subassemblies securely
together, tighten the screw (Item I). To take apart,
proceed in reverse order.
5.2 Joining the drive rod mechanism to the
connecting piece (Fig. 7-10)
Open the handle screw (Item G) and push the
drive rod mechanism (Item 4) into the connecting
piece (Item 5). Make sure that the centering lever
(Item R) latches in the guide hole (Item H). Close
the guard cap (Item N) and tighten the handle
screw. To take apart, undo the handle screw and
open the guard cap. Press the centering lever and
simultaneously pull the drive rod mechanism out
of the connecting piece.
- 23 -
= 14.8 m/s
2
h
10.09.14 14:40 10.09.14 14:40