Proper Use; Technical Data - EINHELL GC-HC 90/2046 T Originalbetriebsanleitung

Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Electric pole hedge trimmer
•
Cutter rail guard
•
Original operating instructions
•
Safety instructions

3. Proper use

Important! This electric hedge trimmer is suitab-
le for cutting hedges, bushes and shrubs.
Important! Do not use this tool to cut grass.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Mains voltage: .........................230-240 V~ 50 Hz
Power rating: ............................................ 900 W
Cutter bar length: ................................... 460 mm
Tooth spacing ........................................... 20 mm
Cuts/min ..................................................... 2100
Weight excluding accessories: .................. 4.5 kg
Protection class: ...........................................II /
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with ISO 22868.
Anl_GC_HC_90-2046_T_St-He_SPK13.indb 17
GB
L sound pressure level ..................... 97.5 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
L sound power level ..................... 101.7 dB(A)
WA
K uncertainty ........................................ 2.45 dB
WA
Guaranteed sound power level L
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Handle under load
Vibration emission value
- Front handle a = 1.488 m/s²
h.
- Rear handle a = 1.574 m/s²
h.
Uncertainty K = 1.5 m/s²
The stated vibration emission levels and stated
noise emission values were measured in ac-
cordance with a set of standardized criteria and
can be used to compare one power tool with
another.
The stated vibration emission levels and stated
noise emission values can also be used to make
an initial assessment of exposure.
Warning:
The vibration and noise emission levels may vary
from the level specifi ed during actual use, depen-
ding on the way in which the power tool is used,
especially the type of workpiece it is used for.
Take appropriate measures to protect yourself
against vibration stress. Take the entire work
sequence into consideration including times at
which the tool is not working under load or is swit-
ched off . Appropriate measures include among
other things regular care and maintenance of the
tool and tool attachments, keeping your hands
warm, taking regular breaks and good work se-
quence planning.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
- 17 -
........... 104 dB
WA
14.11.2022 09:22:22