Herunterladen Inhalt Inhalt Diese Seite drucken

Getting Started; Filling The Tray Reservoir; Placing The Unit; Connecting The Power Adapter - EuroLite B-20 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für B-20:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Filling the tray reservoir

Fluid handling
Always disconnect from the mains or switch it off before filling in fluid. Do not
overfill the tray reservoir. Overfilling will result in damage to the machine. After
usage, empty the tray. If fluid gets inside the machine, have it checked by
skilled personnel before it is operated.
The fluid tray is located in the front of the machine. It can be filled with a maximum of
120 ml of bubble fluid.

Placing the unit

Remove all packing materials from the shipping box. Make sure that there are no
packing remnants at the bubble wheel.
Keep a minimum distance of 20 cm around and above the device as a precaution.
Please consider that liquid may be spilt during operation around the machine.
Position the output of bubbles away from people.

Connecting the power adapter

Connect the USB cable to the USB port and to the power adapter or another USB
power source. Connect the power adapter to a mains socket.

Battery operation

Four 1.5 V batteries may be used to operate the controller. To insert or change the
batteries, switch off the unit first. Then loosen the screws at the battery compartment
and carefully remove the base plate. Take care not to damage the cable. Insert or
change the batteries. Remount the base plate without squeezing the cables. Insert and
tighten the screws. If the controller is not used for a longer period, please remove the
battery to prevent damage in case of battery leakage.
To switch on, set the function switch to ON (level 1 or 2). The fan and the bubble wheel
will start rotating and the machine produces bubbles.
Thanks to the integrated safety function the wheel will automatically stop at obstacles
and does not start again after 2 seconds after removal.
After operation, set the function switch to OFF to switch off the machine. Disconnect
the mains plug and remove the batteries inside if the device is not used for a longer
period.

GETTING STARTED

CAUTION!

OPERATION

14 • EN

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis