ENGLISH
Fig. 48
2
7. Lower the exhaust deflector and lift it out.
8. When refitting, follow the same procedure in reverse order.
7.2 Replacing the air duct and inner
bottom
It is important that the insert is level when installing it inside a
brick or prefabricated surround and hearth/open fireplace.
Fig. 49
1. Lift the air duct (A) up and remove it.
30
Fig. 50
2. Take hold of the hole (B) at the front edge of the inner bottom
(A) and lift it up.
Fig. 51
3. Turn one corner towards you and pull the inner bottom out.
A
4. When refitting, follow the same procedure in reverse order.
B
A
A