Electrolux FEH60G2101 Benutzerinformation Seite 27

Dimensions
Depth
Oven capacity
12.1 Location of the appliance
You can install your freestanding appli-
ance with cabinets on one or two sides
and in the corner.
A
Minimum distances
Dimen-
sion
A
B
12.2 Levelling
Use small feet on the bottom of appliance
to set the appliance top surface level with
other surfaces.
600 mm
74 l
B
A
mm
2
685
12.3 Anti-tilt protection
CAUTION!
You must install the anti-tilt pro-
tection. If you do not install it, the
appliance can tilt.
Your appliance has the symbol
shown on the picture (if applica-
ble) to remind you about the in-
stallation of the anti-tilt protection.
Make sure you install the anti-tilt
protection at the correct height.
1.
Set the correct height and area for
the appliance before you attach the
anti-tilt protection.
2. Install the anti-tilt protection 77 mm
down from the top surface of the ap-
pliance and 49 mm from the left side
of the appliance into the circular hole
on the bracket (see fig.). Screw it into
the solid material or use applicable re-
inforcement (wall).
3. You can find the hole on the left side
at the back of the appliance (see fig.).
Lift the front of the appliance (1) and
put it in the middle of the space be-
tween the cupboards (2). If the space
between the bench cupboards is
larger than the width of the appliance,
you must adjust the side measure-
ment to centre the appliance.
Make sure that the surface behind the
appliance is smooth.
ENGLISH 27