Inhaltsverzeichnis
Werbung
Camera Set: WB Mode:
For white balance, 4 levels of adjustment are available. It is dependent on the outdoor
light conditions.
Default setting is „ATW2". Depending on the light conditions, the following settings
may be available:
o ATW1 Mode: 2.500°K to 9.500° K
o ATW2 Mode: 2.00° K to 10.000° K
o
Indoor: Up to 3200 K
o
Outdoor: Up to 5800 K
Camera Set: Pic Flip:
The picture can be flipped horizontally. Move the joystick left/right to select „OFF/ON"
Default setting is OFF
Camera Set: BLC:
Default setting is OFF, i.e. backlight compensation is not active. If set to „ON",
backlight compensation (BLC) is activated.
You may also press 93 + „Preset".
Camera Set: D/N Mode:
For the IR cut filter, you can choose from „AUTO", „NIGHT MODE" and „DAY MODE",
depending on the light conditions.
Default setting is AUTO.
You may also 94 + „Preset"
Camera Set: DSS Mode (Digital Slow Shutter):
If DSS is set to „ON", this means that the „Digital Slow Shutter" function has been
activated. The shutter speed increases by one second in order to record more light
intensively.
Default setting is OFF.
You may also press 69 + "Preset".
Camera Set: Exit:
Move the joystick right to exit this page.
_________________________________________________________________________________
Bedienungsanleitung / User manual VDC-612ID
- 52 -
Werbung
Inhaltsverzeichnis
