Santec VDC-612ID Bedienungsanleitung Seite 50

Bedienungsanleitung / User manual VDC-612ID
Dome Set: Initialization:
To clear all saved data of „Tour", „Preset", „Sector", „Privacy" or „Pattern", move the
joystick right once the cursor is set to INITIALIZATION.
To delete the saved data, move the joystick right at the respective item.
If you press „FOCUS NEAR" if the cursor is set to „YES", the stored data is deleted.
Then every item such as „Tour", „Preset", „Sector" etc. blinks and appears for approx.
2-3 seconds on the screen. After this, the screen display goes back to the previous
page.
Note:
For "Preset Clear", "Sector Clear", "Privacy Clear" and "Pattern Clear", follow the
same procedure as for „Tour Clear".
In order to delete the stored data and to reset to factory default settings, go to „LOAD
OPTIMIZED DEFAULT" and then move the joystick right. The above page appears.
To select „YES", move the joystick left/right and press „FOCUS NEAR".
For 5-7 seconds the message „ALL DATA INITIALIZING" appears on the screen.
The previous menu page is accessed automatically.
_________________________________________________________________________________
- 50 -