Removing Weighed Product; Setting The Timer - Silvercrest Z31183 Bedienungs- Und Sicherheitshinweise

the standard zero-setting. The circle-symbol disappears as
soon as the TARE function is used.
To do this press the ▲ Z / T button
"TARE" appears in the LC display
"0" is shown in the LC display.
Place the next product to be weighed in the bowl / container.
The weight of the newly added product is shown in the
LC display.
Note: You can repeat this process many times. Never
place more than 5 kg onto the appliance.
Remove the bowl / container and the weighed product
from the balance tray. Press the ▲ Z / T button. Again, the
weight "0" is shown in the LC display.

Removing weighed product

Press the ▲ Z / T button
in the LC display
the LC display.
Remove the desired amount of the weighed product.
The weight of the product is shown in the LC display as
a negative value.
Note: You can repeat this process many times.
Remove the bowl / container and the weighed product
from the balance tray. Press the ▲ Z / T button. Again,
the weight "0" is shown in the LC display.

Setting the timer

The timer can be used in the clock and weighing modes. Set
the timer for a defined time period. A signal sounds at the end
of the period. The set time runs as a countdown.
. The message "TARE" appears
7
. Again, the weight "0" is shown in
5
once. The message
7
. Again, the weight
5
GB/IE 13