Herunterladen Inhalt Inhalt Diese Seite drucken

Unpacking; Preparing For Use; Operation; Filling And Mounting The Mixer Jug - Silvercrest SSM 550 C1 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für SSM 550 C1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Unpacking

• Remove all packaging materials or protective fo-
ils from the appliance. Retain the packaging, so
that you can store the appliance with protection
or send it by post, e.g. should it need repair.
• Before taking the appliance into use, check to
ensure that it is free of damage, check also that
the power cable and plug as well as all accesso-
ries and appliance parts are undamaged.
• Carefully clean all components before taking the
appliance into use for the first time
(see "Cleaning").

Preparing for use

When all components have been cleaned as described
under "Cleaning":
Position the appliance such that, ...
– that the power cable
cess at the rear of the appliance,
– the power plug is immediately accessible, so that
it can be quickly withdrawn in the event of
danger.
– that it is stable and not liable to slip, and such
that the suction cups find a firm hold so that the
appliance cannot tip over due to vibration.
– that the power cable
area and thus not presenting a risk of being inad-
vertently snagged and tipping the appliance
over.
y
passes through the re-
y
is not in the working

Operation

Warning!
The motor switches itself off as soon as the mixer
e
jug
is removed from the motor block
then be overlooked that the appliance is still swit-
ched on. The motor will thus start of its own accord
as soon as the mixer jug
Therefore:
• First insert the power plug into the wall socket
when the mixer jug
its lid fitted and closed.
• Before mounting the mixing jug always check to
see that the appliance is switched off or that the
power plug has been removed.
• Before removing the mixer jug
pliance off, remove the power plug and wait for
the motor to stop revolving.

Filling and mounting the mixer jug

Take the mixer jug
and remove the cover
Fill the mixer attachment
w
cover
firmly back onto the mixer attachment
Ensure that the pourer nose on the mixer jug
also closed.
Insert the filling cap
secure it by turning it clockwise.
Place the ready filled and sealed mixer jug
onto the motor block
e
jug
until you can press it down. The motor
can start only when the mixer jug
positioned.

Selecting operating speeds

When the mixer jug
and securely fitted to the motor block
then switch the appliance on.
- 34 -
u
e
is replaced on it:
e
is filled and mounted with
e
, switch the ap-
e
from the motor block
w
.
e
and then press the
q
into the lid opening and
u
. Lightly turn the mixer
e
is securely
e
is filled, completely sealed
u
, you can
. It could
u
e
.
e
is
e

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Ian 86045

Inhaltsverzeichnis