Cleaning And Care - Silvercrest SWKT 3000 A1 - IAN 102860 Bedienungsanleitung

GB
IE

Cleaning and care

10
Please note that the appliance does not switch off automati-
cally when in the keep hot function. You should therefore never
leave the appliance unattended!
–
As soon as you take the kettle off the base 5, the ON/OFF switch 3
clicks up and the control lamp 4 goes out.
–
To interrupt the heating process, press the ON/OFF switch 3 back
up. The operating light 4 also goes out.
Do not set the temperature control 6 in the transition area
between the "keep hot range" (black) and the "boiling range"
(red) since the water can start to boil due to the diff erence in
water levels.
TIPS
► This appliance is equipped with an overheating protection function: if the
appliance is switched on unintentionally without any water in the kettle, the
appliance switches itself off automatically.
If the appliance boils dry because the lid 1 has not been closed, for
example, the appliance switches itself off automatically. In these cases,
allow the appliance to cool down before using it again.
DANGER – ELECTRIC SHOCK!
► Before cleaning the appliance, disconnect the power plug from the mains
power socket! Otherwise there is the risk of receiving an electric shock!
► Never open any housing parts. There are no user-serviceable elements
inside. When the housing is open, there is the risk of receiving a potentially
fatal electrical shock.
Never immerse the appliance in water or other fl uids! Risk of elec-
trocution if residual liquids come into contact with live components
during operation.
WARNING – RISK OF INJURY!
Allow the appliance to cool suffi ciently before cleaning it. Risk of burns!
►
CAUTION – PROPERTY DAMAGE!
► Do not use abrasive or caustic cleaning agents. These can attack the
surface and damage the appliance beyond repair.
SWKT 3000 A1