Herunterladen Inhalt Inhalt Diese Seite drucken

Letting Air Out; Cleaning And Maintenance; Storage Instruction - Crivit Z31956C Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für Z31956C:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

the product behaves as if it has less air pres-
sure in it because the air inside contracts. Under
these conditions you may have to add air. In
hot weather the air inside expands. Under these
conditions you may have to remove air in order
to avoid overfilling.

Letting air out

j
Pull the air valve out and open it (see Fig. B II + I).
j
Press the sides of the air valve together using your
thumb and index finger.
j
Slowly roll the product up.
Note: Make sure that the product is completely
dry before you roll it up.
j
Press the sides of the air valve again in order to
let any remaining air escape.

Cleaning and Maintenance

J
O n no account should you use corrosive or
scouring detergents.
j
U se a slightly damp, lint-free cloth to clean the
product.
Change the water of paddling pools frequently
(particularly in hot weather) or when noticeably
contaminated.

Storage instruction

j
M ake sure that the product is completely dry
both inside and out when wishing to store it for
any length of time. Otherwise mildew and
mould may form.
j
S tore the product in a dark, dry place – out of
reach of children.
j
The ideal storage temperature is 10 - 20 ° C.
j
E nsure that the product does not come into
contact with sharp objects during storage.
96640_cri_Kinder-Planschbecken_Content_GB_IE.indd 5
Repairing
Note: Minor damage can be repaired by the owner
using the supplied repair kit. Have any major damage
carried out at a specialist repair shop.
j
First let all the air escape from of the product.
j
Cut the patch to suit the size of the hole.
Note: Ensure that the patch is larger than the
hole and overlaps the edges of the hole.
j
Round off the sides of the patch and pull off
the protective foil (see Fig. C).
j
P lace the patch on the hole and press it down
firmly. If necessary, stand a heavy object on
the patch.
j
W ait for 24 hours before you pump up the
product again.
Disposal
The packaging is made entirely of recycla-
ble materials, which you may dispose of
at local recycling facilities.
Contact your local refuse disposal authority for
more details of how to dispose of your worn-out
product.
GB/IE
5
15.11.13 09:46

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis