Operation - switel DC 58x Bedienungsanleitung

6 Operation

Switching the telephone on and off
No calls can be received when the telephone is switched off.
No battery power is used when the telephone is switched off.
No emergency calls can be made when the telephone is switched off. The telephone
must be switched on beforehand, which can take a little time.
2 sec. b
2 sec. b
Key lock 191
The key lock feature prevents functions assigned to buttons being activated accidentally.
1 sec. t
Incoming calls can still be taken in the normal way even when the key lock function is
activated.
1 sec. t
When the key lock is activated, the
The phone can be set−up so that the key lock is automatically activated after 90 seconds if no
operation is carried out; . Page 128.
Telephoning
Taking a call
In addition to the ringing tone, the visual call indicator lights up when a call is received.
{í}, a
Do not hold the phone too close to your ear when it rings as doing so could cause hear-
ing damage!
If you have activated the automatic answering function, the call is taken when the handset is re-
moved from the base station; . Page 128.
Ending a call
b
You can also end the call by replacing the handset in the base station.
Making a call
ë
d
a
It is also possible to press the a button first to obtain the dialling tone for an outside
line. The digits then entered for the phone number (max. 48 digits) are dialled immedia-
tely. It is not possible to correct wrong digits individually using this dialling procedure.
Switch the phone on (activate Standby mode)
Switch the phone off
Activate the key lock function
Deactivate the key lock function
,
icon appears in the display.
Take the call
End the call
Enter the phone number (max. 24 digits)
Delete the last digit if it is wrong
Dial the phone number
Operation
192
119