Set Baud Rate - VEGA VEGAPULS 66 Betriebsanleitung

11 Anhang
11.5 Set number of Floats
Request:
Parameter
Set number of Floats
Response:
Parameter
Set number of Floats
Wird die Anzahl auf 0 gesetzt, wird kein Füllstand mehr zurückgemeldet

11.5 Set Baud Rate

Request:
Parameter
Set Baud Rate
Response:
Parameter
Set Baud Rate
Beispiel: U01B9600E71
Gerät an Adresse 1 ändern zu Baudrate 9600, Parität even, 7 Datenbits, 1 Stoppbit
11.5 Set Receive to Transmit Delay
Request:
Parameter
Set Receive to Transmit Delay
Response:
Parameter
Set Receive to Transmit Delay
11.5 Report Number of Floats
Request:
Parameter
Set Receive to Transmit Delay
72
Length
5 characters ASCII
Length
6 characters ASCII
Length
8 (12) characters ASCII
Length
11 characters ASCII
Length
7 characters ASCII
Length
6 characters ASCII
Length
4 characters ASCII
VEGAPULS 66 • Modbus- und Levelmaster-Protokoll
Code/Data
UuuFn
Code/Data
UuuFOK
Code/Data
UuuBbbbb[b][pds]
Bbbbb[b] = 1200, 9600 (default)
pds = parity, data length, stop bit
(optional)
parity: none = 81, even = 71 (de-
fault), odd = 71
Code/Data
Code/Data
UuuRmmm
mmm = milliseconds (50 bis 250),
default = 127 ms
Code/Data
UuuROK
Code/Data
UuuF