Herunterladen Inhalt Inhalt Diese Seite drucken

Error Displays/Messages - Sony MEX-BT3100U Bedienungsanleitung

Bluetooth audio system
Vorschau ausblenden Andere Handbücher für MEX-BT3100U:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

Bluetooth function cannot operate.
 Turn off the unit by pressing 
for more than 2 seconds, then turn the unit on
again.
No sound is output from the car speakers
during handsfree call.
 If the sound is output from the cellular phone,
set the cellular phone to output the sound from
the car speakers.
Application name is mismatched with the
actual application in App Remote.
 Launch the application again from the "App
Remote" application.
While running the "App Remote" application
via Bluetooth, the display automatically
switches to "BT AUDIO."
 The "App Remote" application or Bluetooth
function has failed.
– Run the application again.

Error displays/Messages

CHECKING
 The unit is confirming the connection of a
USB device.
– Wait until confirming the connection is
finished.
ERROR
 The disc is dirty or inserted upside down.
– Clean or insert the disc correctly.
 A blank disc has been inserted.
 The disc cannot play due to a problem.
– Insert another disc.
 USB device was not automatically recognized.
– Connect it again.
 Press  to remove the disc.
FAILURE
 The connection of speakers/amplifiers is
incorrect.
– See the installation/connections manual of
this model to check the connection.
HUB NO SUPRT (Hubs Not Supported)
 USB hub is not supported on this unit.
NO AF (No Alternative Frequencies)
 There is no alternative frequency for the
current station.
– Press  +/– while the program service
name is flashing. The unit starts searching
for another frequency with the same PI
(Program Identification) data ("PI SEEK"
appears).
NO DEV (No Device)
 "USB" is selected as source without a USB
device connected. A USB device or a USB cable
has been disconnected during playback.
– Be sure to connect a USB device and USB
cable.
NO DISC
 The disc is ejected, or "CD" is selected as the
source without inserting the disc.
NO MUSIC
 The disc or USB device does not contain a
music file.
– Insert a music CD in this unit.
– Connect a USB device with a music file in it.
NO NAME
 A disc/album/artist/track name is not written
in the track.
NOT FOUND
 There is no item beginning with the selected
letter in Alphabet search.
NO TP (No Traffic Programs)
 The unit will continue searching for available
TP stations.
OFFSET
 There may be an internal malfunction.
– Check the connection. If the error indication
remains on in the display, consult your
nearest Sony dealer.
OVERLOAD
 USB device is overloaded.
– Disconnect the USB device, then change the
source by pressing .
– Indicates that the USB device is out of order,
or an unsupported device is connected.
41

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis