Error Displays/Messages - Sony XAV-W1 Bedienungsanleitung

An FM program broadcast in stereo is heard in
monaural.
The unit is in monaural reception mode.
t Set "Mono OFF" (page 19).
RDS
Seek starts after a few seconds of listening.
The station is non-TP or has weak signal.
t Deactivate TA (page 30).
No traffic announcements.
• Activate TA (page 30).
• The station does not broadcast any traffic
announcements despite being TP.
t Tune in another station.
PTY displays "None."
• The current station is not an RDS station.
• RDS data has not been received.
• The station does not specify the program type.

Error displays/Messages

On the main unit
1
Error*
• The disc is dirty or inserted upside down.
t Clean or insert the disc correctly.
• A blank disc has been inserted.
• The disc cannot play due to a problem.
t Insert another disc.
• The disc is not compatible with this unit.
t Insert a compatible disc.
• Press Z to remove the disc.
Failure
The connection of speakers/amplifiers is incorrect.
t See the supplied installation/connections manual to
check the connection.
Loading
The changer is loading the disc.
t Wait until loading is complete.
Local Seek Up/Down
The local seek mode is on during automatic tuning.
NO AF
There is no alternative frequency for the current
station.
t Touch ./> while the program service name
is flashing. The unit starts searching for another
frequency with the same PI (Program
Identification) data ("PI Seek" appears).
No playable disc in disc changer.
The disc is not inserted in the CD changer.
t Insert discs in the changer.
No magazine in disc changer.
The disc magazine is not inserted in the CD changer.
t Insert the magazine in the changer.
No playable data.
The disc is not a music file.
t Insert a music CD in this unit or MP3 playable
changer.
60
NO TP
The unit will continue searching for available TP
stations.
Offset
There may be an internal malfunction.
t Check the connection. If the error indication
remains on in the display, consult your nearest
Sony dealer.
Reading
The unit is reading all file/album (folder) information
on the disc.
t Wait until reading is complete and playback starts
automatically. Depending on the disc structure, it
may take more than a minute.
Please push RESET.
The unit and CD changer cannot be operated due to a
problem.
t Press the reset button (page 14).
"
During reverse or fast-forward, you have reached the
beginning or the end of the disc and you cannot go any
further.
" "
The character cannot be displayed with the unit.
Playback prohibited by region code.
2
*
The DVD playback is prohibited due to the different
region code.
Cannot play this disc.
• The disc is incompatible with this unit.
• The disc is not finalized.
No playable data.
The disc does not contain playable data.
Cannot read this disc.
• The unit cannot read the data due to some problem.
• The data is damaged or corrupted.
*1 If an error occurs during playback, the disc number
does not appear in the display.
*2 The disc number of the disc causing the error
appears in the display.
If these solutions do not help improve the situation,
consult your nearest Sony dealer.
If you take the unit to be repaired because of disc
playback trouble, bring the disc that was used at the
time the problem began.
" or " "