Herunterladen Inhalt Inhalt Diese Seite drucken

Operations During A Call; Preset Dial; Voice Dial Activation - Sony MEX-BT3100U Bedienungsanleitung

Bluetooth audio system
Vorschau ausblenden Andere Handbücher für MEX-BT3100U:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

Operations during a call

Presetting the volume of the ringtone
and talker's voice
You can preset the volume level of the
ringtone and talker's voice.
To adjust the ringtone volume:
Rotate the control dial while receiving a call.
Ringtone volume can be adjusted.
To adjust the talker's voice volume:
Rotate the control dial during a call. The
talker's voice volume can be adjusted.
Note
If the Bluetooth phone source is selected, rotating
the control dial will only adjust the talker's
volume.
Mic gain adjustment
You can adjust the volume for the other
party. Press  (MIC) to adjust the volume
levels ("MIC-LOW," "MIC-MID," "MIC-
HI").
EC/NC Mode (Echo Canceler/Noise
Canceler Mode)
You can reduce echo and noise.
Press and hold  (MIC) to set to "EC/
NC-1" or "EC/NC-2."
Call transfer
In order to activate/deactivate the
appropriate device (this unit/cellular
phone), press  or use your cellular
phone.
Notes
• For details on cellular phone operation, refer to
your cellular phone manual.
• Depending on the cellular phone, handsfree
connection may be cut off when call transfer is
attempted.
24

Preset dial

You can store up to 6 contacts in the preset
dial.
Notes
• If your cellular phone supports PBAP (Phone
Book Access Profile), you can select a phone
number from the phonebook or call history.
• Disconnecting the power supply lead will erase
all the contacts in the preset dial.
1
Select a phone number that you want to
store in the preset dial, from the
phonebook, call history* or by
inputting the phone number directly.
The phone number appears in the
display of this unit.
* For the call history, you can also select from
the caller name. In this case, the caller name
appears in the display of this unit.
2
Press and hold a number button (
to ) to select the preset number to
store until "MEM" appears.
The contact is stored in the selected
preset number.

Voice dial activation

You can activate voice dialing with a cellular
phone connected to this unit by saying the
voice tag stored on the cellular phone, then
make a call.
1
Press  and rotate the control
dial until "VOICE DIAL" appears, then
press it.
2
Say the voice tag stored on the cellular
phone.
Your voice is recognized, and the call is
made.

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis