Troubleshooting - IKEA BARMHÄRTIG Gebrauchsanleitung

ENGLISH
has cooled down using cleaner for glass
ceramic or stainless steel.

Troubleshooting

Warning! Refer to Safety
chapters.
What to do if...
Problem
The appliance cannot be ac-
tivated or is not operating.
The residual heat indicator is
not displaying anything.
There is no signal when you
touch panel symbols.
symbol plus a number
appears on the power set-
ting display.
If there is a fault, first try to find a solution to
the problem yourself. If you cannot find a
Possible cause
The appliance is not connec-
ted to an electrical supply or
it is connected incorrectly.
More than 10 seconds
passed since you activated
the hob.
The Child Safety Device is on
.
Several symbols were
touched at the same time.
The cooking zone was only
on for a short time and is
therefore not hot.
The signals are deactivated. Activate the signals. Refer to
Electronics fault.
solution to the problem yourself, contact
your dealer or the After Sales Service.
Remedy
Check if the appliance is cor-
rectly connected to the elec-
trical supply (refer to con-
nection diagram).
Activate the appliance
again.
Deactivate the Child Safety
Device (See the section
"Child Safety Device").
Touch only one symbol.
If the cooking zone is sup-
posed to be hot, call the Af-
ter Sales Service.
OffSound Control.
Disconnect the appliance
from the electrical supply for
a few minutes. Take the fuse
out of the house's electric
system. If after activating
again, is displayed
again, call the After Sales
Service.
12