Control Board; Set - EuroLite LED TMH-X20 Bedienungsanleitung

Control Board

The Control Board offers several features: you can simply set the starting address, run the pre-programmed
program or make a reset.
Press OK or touch the screen until the display is lit. Browse through the main menu by touching the screen
or pressing the arrow buttons (up, down, left, right). Press OK or the desired menu on the screen in order to
select the desired menu. You can change the selection by pressing the arrow buttons. Press OK in order to
confirm. You can leave every mode by pressing the arrow buttons (left and right). The functions provided are
described in the following sections.
Default settings shaded.
Main menu
Run mode
Sound Sensitivity
DMX address
Channel mode

Set

Invert PAN
Invert TILT
PAN-TILT Swap
PAN-TILT Encoder
No DMX signal
Display
Linear color
Load default
Manu PAN ...
Ver
Show temperature
DMX monitor
System errors
Sys
Total fixture hours
Partial fixture hours
Total lamp hours
Partial lamp hours
Advan
180°
EN
Set
Run Mode
DMX mode
This mode allows the unit to be controlled via every standard DMX controller.
Sound
With this function, you can run the internal program sound-controlled.
Random auto mode
With this function, you can run the random internal program.
Auto mode with special PAN/TILT movement
With this function, you can run 4 internal programs with special PAN/TILT movement in form of an eight or a
zero.
Sub menu
DMX/Sound/Random/
F-Sleep8/F-Stand8/
Forward0/ DrawUp8/
Auto 1 - 4
001-100, 95
001~ 512
18 CH
ON/OFF
ON/OFF
ON/OFF
ON/OFF
Keep/clear
ON/OFF
ON/OFF
OK/Cancel
PAN = XXX ...
32/40
Function
DMX mode / music control / random auto
program / auto programs (with PAN/ TILT
movement in form of an eight "F-Sleep8, F-
Stand8, DrawUp8" and in form of a zero
"Forward0") / auto program 1 - 4
Microphone sensitivity
DMX address setting
Number of DMX channels
Reverse movement
PAN-TILT swap
Automatic PAN/TILT adjustment
Action if no DMX
Display turn off
Switch color change from step to linear color
Restore factory settings
Manual adjustment
Software version
Inside temperature
Current DMX address of the channels
Error message
Fixture running time
Power on running time
LED running time
LED on running time
Only service function for producer
Display reverse 180 degree
Display language select - English/Chinese
00104631, Version 1.0